Border tattoo machine brass sidewinder

Border tattoo machine
Brass sidewinder machine. Clip cord connection
The machine's are handmade individually and milled from a solid block of brass

These sidewinder machines are not noisy like most there is no impact screw so eliminates the clicking sound on the body
I use o-rings on the armature bars which makes the machine quieter

These machines are designed for power lining but can be used for packing and shading with a slight tweak with the volts no adjustment's needed, also can do stippling work if you turn the volts down to 4v.

The machine is very small and compact very fast and hit's like a hammer and will push all round needles with ease also 20 mags if needed

It's fitted with a powerful and super reliable MABUCHI motor and recommend the rotation is clockwise
clip cord positive goes to the bottom binding post and negative to the top binding post
Recommended running volts are 4-6 v.

Needle throw is around 4.5mm.
The clip cord connection are on the side of the machine
These machines are the nearest thing to a coil machine and runs like a coil machine .
Quick change tube vice.

Not recommended for cartridges but will run carts with 1 or 2 rubber bands wrapped over the armature bar and onto the pins on the side of the machine this compensates for the resistance of the membrane in the cartridge etc.

Volts are only a guideline and will differ between different power supplies